VP 531M - Polypropylene Reservoir with 384 Dimpled Bottom for 384 Robotic Pipettors, 2 Separate Control Wells with 16 Positions each and 2 Large Sections with 176 Positions each, SLAS Footprint x 32 mm Tall
Availability: In stock
|Materials - Attributes||Polypropylene|
|Special Features||No fitting ports|
|Well Bottom Shape||Dimple|
The VP 531M is a 384 style reagent reservoir with 2 small one column wide control wells in column 1 and column 13 and 2 larger sections of control wells in columns 2 through 12 and 14 through 24. The larger sections each holding 90 ml and two single column sections holding 5 ml each. We have "dimpled" the bottom of the reservoir so the last dregs of an expensive reagent can be used.
The reagent reservoir conforms to SBS standard dimensions of 127.7 mm long 85.5 mm wide and with a 25.4 mm deep cavity and stands 32 mm tall. The reservoirs are constructed of solvent resistant Polypropylene.
The two large sections are (1) A-P 2-13 and (2) A-P 14-24. The two narrow sections are, (3) A-P 1, and (4) A-P 13. Dividing walls are 1.3 mm wide. Check your pipet tip separation to see if it can accommodate the wall thickness.
This reservoir is also available in lipophobic coated aluminum with thinner dividing walls to accommodate wider pipet tips. See VP 531M-AL.
When you have thin wall dividers between control wells of both polypropylene and PTFE reservoirs we DO NOT RECOMMEND AUTOCLAVING THE RESERVOIR FOR FEAR OF DEFORMING THE THIN WALLS.
None at this time