VP 178BJ - 96 Channel Aspiration Manifold on 9 mm centers and 13 mm long for Microplates on VP 179A Jig
Availability: In stock
|Tube Gauge||23 gauge|
|Tube Length||13 mm|
|Bottle Top Dispenser Range||N/A|
|Center-To-Center Spacing||9 mm|
|Materials - Attributes||No|
|Plate Type Compatibility||Standard Well|
|# of Channels||384 channel|
|Manifold Style||Manifold Full Plate|
One of our customers asked us to make an aspiration manifold that could be used to remove unbound reagents from 96 well microplates from different manufactures and consequently with different well depths. Our solution was to modify a VP 178B by putting shoulder bolts on it so it can adapt to the VP 179A Jig. The result is the VP 178BJ. These manifolds are resistant to acids, bases and organic solvents as they are made with a rugged polypropylene body and 19 gauge stainless steel tubing. The shoulder bolts register the manifold to the Jig and the Jig can be adjusted in all 3 axis X, Y, and Z for perfect positioning of the tubes in the wells. The alignment of the plates with the tubes is a snap.
This manifold can also be sterilized by autoclave and used to aspirate sterile media.
The VP 178BJ 96 tube aspirator is designed to work with the VP 179A Jig to completely aspirate the liquid contents of 96 well microplates. This aspiration system positions the aspiration tubes so they can be dropped down the center of the well and then slid into the corner of a well and completely remove the liquid.
None at this time