VP 179CJ - 384 Channel Aspiration Manifold on 4.5 mm centers and 13 mm long for Microplates on VP 179A Jig

SKU
VP 179CJ

Aspiration Manifold For 384 Standard Well Microplates, Designed to be mounts to the VP 179A, Polypropylene Housing, 20 Gauge Stainless Steel Tubes, 13mm Length, Each

VP 179CJ One of our customers asked us to make an aspiration manifold that could be used to remove unbound reagents from 384 well microplates from different manufactures and consequently with different well depths. Our solution was to modify a VP 179C by putting shoulder bolts on it so it can adapt to the VP 179A Jig. The result is the VP 179CJ. These manifolds are resistant to acids, bases and organic solvents as they are made with a rugged polypropylene body and 20 gauge 316 stainless steel tubing (low magnetism). Because there are 384 tubes (20 gauge) a very high vacuum is required. To facilitate the vacuum requirements we have fitted the VP 179CJ with two large bore nipples. If you do not have a high vacuum source we recommend you use our VP 179BJ which uses 23 gauge tubing. The shoulder bolts register the manifold to the Jig and the Jig can be adjusted in all 3 axis X, Y, and Z for perfect positioning of the tubes in the wells. The alignment of the plates with the tubes is a snap. This manifold can also be sterilized by autoclave and used to aspirate sterile media.
More Information
Product Name VP 179CJ - 384 Channel Aspiration Manifold on 4.5 mm centers and 13 mm long for Microplates on VP 179A Jig
Description Aspiration Manifold For 384 Standard Well Microplates, Designed to be mounts to the VP 179A, Polypropylene Housing, 20 Gauge Stainless Steel Tubes, 13mm Length, Each
Microplate Format 384
Components Manifolds/Wands
Microplate Type Standard Well
# of Channels 384 channel
Manifold Style Manifold Full Plate
Tube Length 13 mm
Autoclavable Yes
Materials Polypropylene, Stainless Steel
Tube Gauge 20 gauge
Center-to-Center Spacing 4.5 mm

Coming Soon

 -

Downloads

Tech Notes