VP 531D - Polypropylene Reservoir with 384 Dimpled Bottom for 384 Robotic Pipettors, 16 Separate Control Wells with 4 positions in each and one large section, SLAS Footprint x 32 mm Tall

Reagent Reservoir with 384 dimpled depressions and 16 control mini-chambers with 4 depression on one edge, each chamber depth = 2.54cm made from polypropylene
SKU: VP 531D

Availability: In stock

 
 
  Description    Specifications    Details    Applications    Media    Blogs  
Details
Reagent Reservoir with 384 dimpled depressions and 16 control mini-chambers with 4 depression on one edge, each chamber depth = 2.54cm made from polypropylene
Additional Info
Materials - Attributes Polypropylene
Max Capacity N/A
Coating/Encapsulation N/A
Format 384
Special Features No fitting ports
Wall Thickness N/A
OD N/A
ID N/A
Length N/A
Well Bottom Shape Compatibility Dimple

The VP 531D is a reagent reservoir where both columns 1&2 and columns 3 &4 are used to make 16 control reservoirs. Note that because of the location of the control wells in columns 3&4, they will only hold 1.4 ml. The reagent reservoir conforms to SBS standard dimensions of 127.7 mm long 85.5 mm wide and with a 25.4 mm deep cavity and stands 32 mm tall. The reservoirs are constructed of solvent resistant Polypropylene.

The photo to the right illustrates the reservoir with the main segment filled with a liquid. Dividing walls are 1.3 mm wide. Check your pipet tip separation to see if it can accommodate the wall thickness.

When you have thin wall dividers between control wells of both polypropylene and PTFE reservoirs we DO NOT RECOMMEND AUTOCLAVING THE RESERVOIR FOR FEAR OF DEFORMING THE THIN WALLS.

Coming Soon

Gifs

None at this time