VP 531E-PTFE - PTFE Reservoir with 384 Dimpled Bottom for 384 Robotic Pipettors, 4 Separate Control Wells with 4 positions and 4 Large Sections with 92 positions in each and one large section, SLAS Footprint x 32 mm Tall
Availability: In stock
|Materials - Attributes||PTFE|
|Special Features||No fitting ports|
|Well Bottom Shape Compatibility||Dimple|
The VP 531E-PTFE is a 384 style reagent reservoir with 4 segments each holding 45 ml and within those segments at positions are positioned control mini-chambers at G1, G2, H1, H2 and I1, I2, J1, J2 at the edge and G13, G14, H13, H14 AND I13, I14, J13 J14 in the center with 4 dimple depressions in each control chamber. The control wells hold 1.4 ml each. Although not visible in the photo at the right the bottom of reservoir is dimpled in a 384 pattern. We have also "dimpled" the bottom of the reservoir so the last dregs of an expensive reagent can be used.
The reagent reservoir conforms to SBS standard dimensions of 127.7 mm long 85.5 mm wide and with a 25.4 mm deep cavity and stands 32 mm tall. The reservoirs are constructed of solvent resistant PTFE.
Dividing walls are 1.3 mm wide. Check your pipet tip separation to see if it can accommodate the wall thickness.
When you have thin wall dividers between control wells of both polypropylene and PTFE reservoirs we DO NOT RECOMMEND AUTOCLAVING THE RESERVOIR FOR FEAR OF DEFORMING THE THIN WALLS.
None at this time