VP 531N-2 - Polypropylene Reservoir with 384 Dimpled Bottom for 384 Robotic Pipettors, 11 Separate Control Wells of 4 different Dimensions and one large section with 352 Positions, SLAS Footprint x 32 mm Tall
Availability: In stock
|Materials - Attributes||Polypropylene|
|Special Features||No fitting ports|
|Well Bottom Shape||Dimple|
The VP 531N-2 is a 384 style reagent reservoir with three small two column wide control wells in columns 1 and 2 (two control wells covering 10 positions and one control well (center) covering 12 positions. Another series of control wells are on the right side of the reservoir and cover 4 positions each in columns 23 and 24 and single large control section in the middle of the reservoir in columns 3 through 22. The large section holds 160 ml, the 10 position control wells hold 5 ml, the 12 position control well hold 6 ml, the position control wells hold 2 ml. We have not "dimpled" the bottom of this reservoir unlike that of the VP 531N reservoir.
The reagent reservoir conforms to SBS standard dimensions of 127.7 mm long 85.5 mm wide and with a 25.4 mm deep cavity and stands 32 mm tall. The reservoirs are constructed of solvent resistant Polypropylene.
Dividing walls are 1.3 mm wide. Check your pipet tip separation to see if it can accommodate the wall thickness.
When you have thin wall dividers between control wells of both polypropylene and PTFE reservoirs we DO NOT RECOMMEND AUTOCLAVING THE RESERVOIR FOR FEAR OF DEFORMING THE THIN WALLS.
None at this time