VP 531N - Polypropylene Reservoir with 384 Dimpled Bottom for 384 Robotic Pipettors, 5 Separate Control Wells of 3 different Dimensions and one large section with 352 Positions, SLAS Footprint x 32 mm Tall
Availability: In stock
|Materials - Attributes||Polypropylene|
|Special Features||No fitting ports|
|Well Bottom Shape Compatibility||Dimple|
The VP 531N is a 384 style reagent reservoir with two small two column wide control wells in columns 1 and 2 and three small two wide control wells in columns 23 and 24 and single large control section in the middle of the reservoir in columns 3 through 22. The large section holds 160 ml, the 16 dimpled control wells hold 8 ml, the 10 dimpled control well hold 5.5 ml, the 12 dimpled control well hold 6 ml and the 8 dimpled control well hold 4 ml. We have "dimpled" the bottom of the reservoir so the last dregs of an expensive reagent can be used.
The reagent reservoir conforms to SBS standard dimensions of 127.7 mm long 85.5 mm wide and with a 25.4 mm deep cavity and stands 32 mm tall. The reservoirs are constructed of solvent resistant Polypropylene.
Dividing walls are 1.3 mm wide. Check your pipet tip separation to see if it can accommodate the wall thickness.
When you have thin wall dividers between control wells of both polypropylene and PTFE reservoirs we DO NOT RECOMMEND AUTOCLAVING THE RESERVOIR FOR FEAR OF DEFORMING THE THIN WALLS.
None at this time